Answers are grounded in this paper and cite their sources.
The fabrication of linear, circular, and elliptical reflective zone plate lenses by a multistep process using microfabrication technologies is reported. The diffractive elements were generated by electron-beam lithography on a Mo/C multilayer mirror obtained by means of the triode sputtering technique. The patterns were transferred anisotropically into the multilayer mirror by reactive ion etching in a fluorinated plasma. An intermediate metallic mask made by the lift-off process was used for the transfer process. The groove depth could be monitored by following the reflectivity ofthe structure with a helium-neon laser during etching. Linear, circular (with 0.4-μm outer zones), and elliptical Fresnel zone plates (with 0.8-μ.m outer zones) were produced. Test patterns with a 50-nm top and 90-nm bottom resolution were produced. The groove profile and dimensional control were also investigated.
No takes yet. Share an insight, caveat, or question.
Chantal G. Khan Malek (1991) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: