Answers are grounded in this paper and cite their sources.
When high‐temperature superconducting (HTS) tapes in high voltage DC HTS devices are quenched, amounts of thermal bubbles are generated in liquid nitrogen (LN 2 ) that will reduce the insulation strength greatly. Especially when resistive‐type superconducting fault current limiters meet a short‐circuit fault, the insulation strength of the LN 2 decreased significantly due to the thermal bubbles and electrothermal pressure. Solid insulating barriers can improve the insulation strength of the LN 2 . The objective of this study is to obtain the effect of barrier thickness on the DC dielectric breakdown characteristics of LN 2 . Insulating barrier Polytetrafluoroethylene with three different thicknesses were tested. Three types of electrodes such as rod‐plane, needle‐plane, and plane‐plane were applied. The results showed that the barriers can increase the negative and positive breakdown voltage both with and without thermal bubbles in a slightly non‐uniform field (SNF) and non‐uniform field (NF). For the SNF, the DC breakdown voltage is higher when the barrier is thinner. The effect of the barrier thickness in the NF is lower than that in the SNF field. For the NF, the positive breakdown voltage is higher when the barrier is thicker.
No takes yet. Share an insight, caveat, or question.
Xiang et al. (2022) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: