Answers are grounded in this paper and cite their sources.
A method is presented to phase-modulate RF pulses through an injection-locking technique. The modulator can produce either binary phase-shift keying or quadrature phase-shift keying modulated wave packets (pulses). The RF pulses are produced using a fast on/off switching technique to power up and power down a tunable ring oscillator whose free-running frequency can be tuned from 3 to 10 GHz. Experiments show that the modulator's minimum energy consumption is 13 pJ/pulse for a carrier frequency of 3 GHz, while its maximum consumption is 18 pJ/pulse when the carrier frequency is 10 GHz. The energy consumption figures are for 2-ns-long pulses with amplitudes of 300 mV at 3 GHz and 200 mV at 10 GHz. The pulse repetition rate is 250 MHz. The measured root-mean-square jitter of the oscillator, integrated from 100 Hz to 1 MHz, is below 3.6 ps. The chip was fabricated in 130-nm CMOS and it occupies a total area of 0.85 mm2including bonding pads while the active circuit area is 0.05 mm2.
No takes yet. Share an insight, caveat, or question.
El‐Gabaly et al. (2014) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: