Answers are grounded in this paper and cite their sources.
For several decades, arsenic (As) contamination of water was considered as an issue of great concern. In this study, magnesium hydroxide coated iron nanoparticles (nFe0@Mg(OH)2) were developed for enhancing arsenic removal from aqueous solutions. Several parameters were investigated, including Mg/Fe coating ratio, nFe0@Mg(OH)2 dosage, initial pH, reaction temperature, and initial As(V) concentration. The characteristics of the synthesized materials were studied using different techniques, such as transmission electron microscopy (TEM), X-ray diffraction (XRD), and X-ray absorption near edge structure (XANES). Results indicated the superiority of the highest Mg/Fe coating ratio (100%) to the other lower ratios in As(V) removal, corresponding to the adsorption contribution of Mg(OH)2 coating shell. Furthermore, nFe0@Mg(OH)2-100% could efficiently achieve around 100 % final As(V) removal efficiency at wide pH and temperature ranges (3.0 – 9.0, and 25 – 75 oC), at a low dosage of 0.5 g/L, reflecting the high applicability of the proposed material. Mg(OH)2 coating enhanced the anti-aggregation effect of the magnetic nanoparticles, which was confirmed by TEM measurements. Kinetics, thermodynamic, and isotherm analyses depicted that pseudo-second-order was the best model to describe the kinetics data, the endothermic nature of the reaction, and a maximum Sips sorption capacity of 89.97 mg/g (following Sips isotherm model), respectively.
No takes yet. Share an insight, caveat, or question.
Maamoun et al. (2023) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: