Answers are grounded in this paper and cite their sources.
The packer test has been used for many years as a simple method of assessing the hydraulic conductivity of a limited section of a borehole. Separate developments in grouting, engineering geology, the oil industry and, particularly, in hyrogeology have improved the testing techniques dramatically. The use of continuous recording equipment, modern materials for packers, lightweight installations and revised testing procedures have enabled accurate economic testing. It is suggested that a revised specification should be adopted, other than that given in BS 5930 and other standards, in order to improve the quality of the test and the information obtained. In particular, it is suggested that, wherever possible, outflow testing should be used and, under normal conditions, a testing pressure not exceeding 25% of the hydrostatic head, or 10 m head for deep wells, should be used for reliable measurements. Large differential heads only should be used to investigate hydraulic fracturing and associated problems. A procedure for interpretation of the results obtained is suggested, together with information on the investigation of fissures and the effects of anistropy in the test zone. The paper includes a suggested specification for the testing procedure such that high-quality, reliable, useful and economic packer testing may become routine in conventional site investigation.
No takes yet. Share an insight, caveat, or question.
S. Walthall (1990) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: