Answers are grounded in this paper and cite their sources.
AlSi10Mg is one of the most applied aluminum alloys in laser-based powder bed fusion of metals, combining high specific strength with good corrosion resistance. Increasing process efficiency by applying large layer thicknesses is an attractive strategy to reduce process times, but its implications for structural integrity remain insufficiently understood. In the present study, AlSi10Mg specimens were manufactured using layer thicknesses of 60 µm and 120 µm and systematically analyzed with respect to microstructure, defect population, tensile behavior, and fatigue performance. Electron backscatter diffraction and backscattered electron analyses revealed coarser melt pool structures in the 120 µm condition, while computed tomography confirmed a higher defect population dominated by keyholes compared to the 60 µm reference. In tensile testing, both conditions exhibited comparable yield strength, whereas ultimate tensile strength and ductility were reduced for the 120 µm condition. Under total strain-controlled low-cycle fatigue, both layer thicknesses showed similar cyclic deformation responses at low strain amplitudes, whereas at higher strain amplitudes, the 60 µm specimens exhibited slightly higher stress amplitudes, consistent with their higher tensile strength. In contrast, stress-controlled high-cycle fatigue tests demonstrated a pronounced defect sensitivity. The 120 µm condition revealed reduced fatigue lives and a lower fatigue limit due to a higher population of fatigue-critical lack-of-fusion defects representing the crack-initiating defects in both conditions. Overall, the results highlight that while large layer thicknesses significantly improve build efficiency, the associated increase in defect size and population strongly governs fatigue performance, underscoring the need for process optimization in safety–critical applications.
No takes yet. Share an insight, caveat, or question.
Wegener et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: