Answers are grounded in this paper and cite their sources.
By the use of thermal volatilization analysis (TVA), 292°C was chosen as a suitable temperature for a preliminary experimental survey of the thermal degradation of styrene–acrylonitrile copolymers. TVA also indicated that there is no fundamental change in reaction mechanism as the acrylonitrile content of the polymer is increased from zero to 33.4% although there is a progressive increase in the rate of volatilization. The increase in the rate of volatilization over that of polystyrene is directly proportional to the acrylonitrile content of the copolymer. From the changes in molecular weight which occur during the reaction it is clear that the primary effect of the acrylonitrile units on stability is to cause an increased rate of chain scission, but there is a small proportion of “weak links” which are associated with the styrene units and which are broken instantaneously at 292°C. The number of monomer molecules liberated per chain scission, the zip length, is about 40 for polystyrene in the initial stages of degradation and decreases only to the order of 20 even in copolymer containing 24.9% acrylonitrile. Thus the unzipping process is not severely affected by the acrylonitrile units; this is borne out by the fact that acrylonitrile appears among the products in very much greater concentrations than from pure polyacrylonitrile. The proportion of larger chain fragments (dimer, trimer, etc.) also increases with acrylonitrile content.
No takes yet. Share an insight, caveat, or question.
Grassië et al. (1970) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: