Answers are grounded in this paper and cite their sources.
Nanocomposites based on ultrahigh-molecular-weight polyethylene and inorganic fillers—such as organomodified layered aluminosilicates, aerosil, and diatomite—are prepared via polymerization filling. The polymerization of ethylene was conducted in the suspension mode with the use of a conventional Ziegler-Natta catalyst, TiCl 4 + Al( i -Bu) 3 , under mild conditions (a temperature of 30°C and a pressure of 0.1MPa). The structure and properties of the composites are studied via X-ray diffraction analysis and DSC. The polyethylene matrix features a high enthalpy, a high melting temperature (up to 143°C), a crystallinity of 70–80%, a content of the monoclinic phase of 12–15%, and a bulk density of 0.05–0.15 g/cm 3 ; the molecular mass is (1.5–1.6) × 10 6 . High-modulus, high-strength fibers with an elastic modulus of 25–28 GPa and a strength of 0.65–0.70 GPa are prepared via direct solvent-free molding of nascent reactor powders based on ultrahigh-molecular-weight polyethylene filled (7 wt %) with aerosol or montmorillonite modified with vinyltrimethoxysilane.
No takes yet. Share an insight, caveat, or question.
Харькова et al. (2014) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: