Answers are grounded in this paper and cite their sources.
Polycrystalline specimens of the intermetallic compound Al3Ti with the D022-type structure have been deformed under compression at 25–860°C. At temperatures below 620°C, specimens fracture with very small fracture strain since extremely localized deformation occurs and cracks are initiated in intensely deformed regions almost at yielding. At temperatures above 620°C, good compression ductility is observed. Yield stress starts decreasing rapidly with increasing temperature at around 330°C and becomes less temperature dependent above 630°C. The major mode of deformation of Al3Ti is twinning of the type (111)[112] which does not disturb the D022 symmetry of the lattice. However, at high temperatures, the four (111)[112]-type twinning systems are augmented by slip of the types [110], [100] and [010]. This would supply an explanation for the good compression ductility observed at temperatures above 620°C. Suggestions are made for further experimental work on alloying additions which may improve the ductility of Al3Ti.
No takes yet. Share an insight, caveat, or question.
Yamaguchi et al. (1987) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: