Answers are grounded in this paper and cite their sources.
This study investigates a sustainable high-performance cementitious composite incorporating polypropylene fibers and a high volume of ground granulated blast furnace slag (GGBFS) to reduce clinker content and environmental impact. High-volume slag systems typically exhibit delayed hydration and reduced early-age strength. To address these limitations, nano-calcium carbonate (NCC) and nano-silica (NS) were incorporated as performance-enhancing additives. Although nano-materials are widely studied in ordinary Portland cement systems, their comparative performance in high-slag fiber-reinforced cementitious composites (FRCC) remains insufficiently clarified. The influence of NS and NCC on rheological behavior and age-dependent mechanical performance was systematically evaluated under identical mixture conditions. Fresh-state properties were assessed using slump flow, while compressive strength, flexural strength, mid-span deflection, ductility index, and energy absorption were measured at 7, 28, and 90 days. Both nano-additives enhanced mechanical performance at all ages. Nano-silica demonstrated superior long-term effectiveness, increasing 90-day compressive strength by up to 24% relative to the fiber-reinforced control. However, NS reduced slump flow from 80 mm to 70 mm (12.5%), compared to 74 mm for NCC, highlighting the trade-off between mechanical enhancement and workability in low water-to-cement ratio, high-slag FRCC systems.
No takes yet. Share an insight, caveat, or question.
Mazloom et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: