Answers are grounded in this paper and cite their sources.
Fluid Thrust Vectoring represents a focal point of current research in small-scale satellites, including CubeSATs and nanoSATs. This study assesses thrust vectoring capabilities in single and dual-throat micronozzles with bypass injection. A two-dimensional computational study was carried out to investigate flow characteristics using an unsteady, density-based compressible solver. The methodology is validated by comparing the predictions with existing experimental results from the literature. Unlike a conventional CD micronozzle, distinct flow characteristics such as pressure stabilization and spatial independence of Mach number are identified in the single-throat bypass micronozzle. It is observed that optimal pitch vectoring performance is achieved when the bypass injection is positioned significantly downstream of the throat in a single-throat micronozzle. Enhanced thrust performance is observed with a wider bypass width. It is found that the recession cavity angle plays a major role in dictating the dual-throat vectoring performance. An optimum thrust performance is observed for a dual-throat micronozzle at a divergence angle of 10°. Hence, the key design parameters influencing vectoring performance are bypass width and the location of secondary injection. These findings contribute insights to designing and optimizing micronozzles for a fair amount of thrust vectoring in micronozzles.
No takes yet. Share an insight, caveat, or question.
Kishore et al. (2024) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: