Answers are grounded in this paper and cite their sources.
This paper first provides an overview of some recently ratified wireless local-area network (WLAN) standards before describing an illustrative 5-GHz WLAN receiver implementation. The receiver, built in a standard 0.25-/spl mu/m CMOS logic technology, exploits several recent developments, including lateral-flux capacitors, accumulation-mode varactors, injection-locked frequency dividers, and an image-reject low-noise amplifier. The receiver readily complies with the performance requirements of both IEEE 802.11a and ETSI HiperLAN. It exhibits a 7.2-dB noise figure, as well as an input-referred third-order intercept and 1-dB compression point of -7 and -18 dBm, respectively. Image rejection for this double conversion receiver exceeds 50 dB throughout the frequency band without using external filters. Leakage out of the RF port from the local oscillators is under -87 dBm, and all synthesizer spurs are below the -70-dBm noise floor of the instrumentation used to measure them. The receiver consumes 59 mW from a 1.8-V supply and occupies only 4 mm/sup 2/ of die area, in no small measure due to the use of fractal capacitors for ac coupling.
No takes yet. Share an insight, caveat, or question.
Lee et al. (2002) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: