Answers are grounded in this paper and cite their sources.
Borysko and Sapranauskas (1) and independently Gay (2) have described a method of making coverslip preparations of biological material from which small selected cell groups or single cells may be transferred to methacrylate for sectioning for electron microscopy. In both procedures it is suggested that the selected material viewed under light and phase microscopy be covered with a capsule containing partially polymerized methacrylate for final polymerization and hardening. The essential aim is to place a capsule filled to the brim with partially polymerized methacrylate open end down on the selected cell or cell group, so that the latter can be in the center of the (future) block. The present authors found it difficult accurately to invert and position the capsule with reference to a single cell or a small group of cells in a single cell layer. Such positioning is readily accomplished by the use of the auxiliary equipment described here, which can be built at low cost (about 4 shop hours). Text-fig. 1 shows the apparatus used. The insert shows a lucite block (LBL) containing a central canal drilled to hold loosely a capsule filled to the brim
No takes yet. Share an insight, caveat, or question.
Nebel et al. (1956) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: