Installation for air cleaning from organic impurities by plasma formed by barrier discharge of nanosecond duration

A prototype installation for air cleaning by plasma, which consists of a barrier-type discharge reactor and a high-voltage nanosecond-pulse supply generator, which is based on drift step recovery diodes, is considered. A stable corona-type barrier discharge was obtained at a 3-kHz supply-pulse repetition frequency. The discharge remained nonlocalized even at a small gas-discharge gap (∼6 mm) due to a short (∼25 ns) pulse duration, which allows a quite uniform effect on the air flow. The high rise rate (∼6 kV/ns) of the applied supply voltage pulses determines the high voltage amplitude (∼25 kV) at the reactor at the breakdown moment and allows maintenance of high electric-field intensity and a high intensity of plasma chemical processes. Thus, an electrical power lower than 8 W is required at the reactor input to produce 1 g of ozone per hour. The concentration of methylmercaptan in air during waste-water smell deodorizing at State Unitary Enterprise “Vodokanal of St. Petersburg” was reduced down to an allowable level of 0.5 mg/m 3 at the electrical power consumption no higher than 0.25 W per cubic meter of air.