Answers are grounded in this paper and cite their sources.
A nanosecond microwave pulse source based on a nonlinear transmission line (NLTL) with saturated ferrite, operating in the S-band, has been developed and experimentally tested. Its key feature is the absence of electromagnets in its design. The source consists of a sharpening NLTL with an unsaturated ferrite, a corrugated NLTL, a coaxial high-pass filter, and a combined antenna. Both the sharpening and corrugated lines utilize NiZn ferrite rings. NdFeB permanent magnets are used to saturate the ferrite in the corrugated NLTL. The line provides efficient generation of high-frequency pulses in the frequency range of 2.7–3.6 GHz. The operating voltage range of the source is 50–190 kV. The coaxial high-pass filter has a passband of 1.2–4 GHz, which allows for effective radiation of oscillations excited in the line as well as the high-frequency energy concentrated on the front of the voltage pulse. The combined antenna has an operating range of 1–4 GHz. A pulsed periodic operating mode was implemented with a pulse repetition rate of 50 Hz up to 2000 pulses per burst. At an operating voltage of 170 kV, the central frequency of the radiated pulse is 3.4 GHz. The effective potential of the source is 65 kV.
No takes yet. Share an insight, caveat, or question.
Priputnev et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: