Answers are grounded in this paper and cite their sources.
Thermal management of high-power semiconductor lasers is of great importance since the output power and beam quality are affected by the temperature rise of the gain region. Thermal simulations of a vertical-external-cavity surface-emitting laser by a finite-element method showed that the solder layer between the semiconductor thin film consisting of the gain region and a heat sink has a strong influence on the thermal resistance and direct bonding is preferred to achieve effective heat dissipation. To realize thin-film semiconductor lasers directly bonded on a high-thermal-conductivity substrate, surface-activated bonding using an argon fast atom beam was applied to the bonding of gallium arsenide (GaAs) and silicon carbide (SiC) wafers. The GaAs/SiC structure was demonstrated in the wafer scale (2 in. in diameter) at room temperature. The cross-sectional transmission electron microscopy observations showed that void-free bonding interfaces were achieved.
No takes yet. Share an insight, caveat, or question.
Higurashi et al. (2015) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: