Answers are grounded in this paper and cite their sources.
In the present study, the impact factor variation of a slab bridge supported by laterally deformed laminated bearings was investigated through 3D FE moving load analysis. The neo-Hookean model was adopted for the bearing, and the slab deck was modeled with solid elements. From the analysis results, the bearing vertical stiffness decreased slightly until a lateral deformation ratio of 0.3, which is defined as the ratio of the lateral displacement to the total thickness of the bearing. However, the stiffness decreases above this ratio, showing a 10.87% decrease for a deformation ratio of 0.7. The peak impact factor is almost the same up to a deformation ratio of 0.7. However, a larger deformation ratio leads to a precipitous increase in the impact factor, which is an increase of approximately 10% under the 1.0 ratio, which is the maximum deformation ratio considered in this study.
No takes yet. Share an insight, caveat, or question.
Kim et al. (2022) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: