Answers are grounded in this paper and cite their sources.
Research Article| July 01, 1979 A Sorting Mechanism for a Riffle-Pool Sequence Thomas Lisle Thomas Lisle 1Pacific Southwest Forest and Range Experiment Station, Forest Service. U.S. Department of Agriculture. Berkeley, California, stationed at Arcata, California 95521 Search for other works by this author on: GSW Google Scholar Author and Article Information Thomas Lisle 1Pacific Southwest Forest and Range Experiment Station, Forest Service. U.S. Department of Agriculture. Berkeley, California, stationed at Arcata, California 95521 Publisher: Geological Society of America First Online: 02 Mar 2017 Online Issn: 1943-2674 Print Issn: 0016-7606 © 1979 The Geological Society of America, Inc. GSA Bulletin (1979) 90 (7_Part_II): 1142–1157. https://doi.org/10.1130/GSAB-P2-90-1142 Article history First Online: 02 Mar 2017 Cite View This Citation Add to Citation Manager Share Icon Share Facebook Twitter LinkedIn MailTo Tools Icon Tools Get Permissions Search Site Citation Thomas Lisle; A Sorting Mechanism for a Riffle-Pool Sequence. GSA Bulletin 1979;; 90 (7_Part_II): 1142–1157. doi: https://doi.org/10.1130/GSAB-P2-90-1142 Download citation file: Ris (Zotero) Refmanager EasyBib Bookends Mendeley Papers EndNote RefWorks BibTex toolbar search Search Dropdown Menu toolbar search search input Search input auto suggest filter your search All ContentBy SocietyGSA Bulletin Search Advanced Search Abstract Transport of coarse, heterogeneous debris in a natural stream under a wide range of flows usually results in a remarkably stable, undulatory bed profile, which manifests an in transit sorting process of the bed material. In general, finer material representative of the bulk of the normal bed load resides in the deep sections, or pools, below flood stages. At high flows, pools may scour to immovable boulders or bedrock. Coarser material transported at more infrequent flows forms the shallow sections, or riffles. Above a flow threshold, the pool fill material is often scoured and deposited in part over the riffles (Lane and Borland, 1954; Andrews, 1977). Interactions among coarse particles in motion in turbulent flow tend to concentrate them in groups with the coarsest particles at the surface (Langbein and Leopold, 1968). Incipient accumulations of coarse particles may be perpetuated by altering the flow conditions which influence bed load transport.As flow increases, submergence of the riffle-pool bed topography modifies its effect on the local hydraulic conditions. At low flow, mean volocity and water surface slope are greater, and mean depth is less at a riffle than at a pool. Competence is greater at the riffle. As the stage increases, the water-surface profile tends to even out as the hydraulic gradient over a riffle decreases and that over a pool increases (Leopold and others, 1964). Corresponding values of velocity and depth tend to converge, although depth often less so (Richards, 1976; Lisle, 1976; Andrews, 1977). The convergence of respective values of water-surface slope over a riffle and pool and the greater depth of the pool cause mean shear stress, τ = γRSE (where γ is the specific gravity of water, R is the hydraulic radius or approximately the mean depth, and SE is the energy gradient), to increase more rapidly at the pool (Leopold and others, 1964). As a result, competence as measured by velocity or bottom shear stress should become more evenly distributed over a riffle and pool (Richards, 1976) or even reversed in. hierarchy at high flow (Gilbert, 1914; Keller, 1971). This content is PDF only. Please click on the PDF icon to access. First Page Preview Close Modal You do not have access to this content, please speak to your institutional administrator if you feel you should have access.
No takes yet. Share an insight, caveat, or question.
Thomas E. Lisle (1979) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: