Answers are grounded in this paper and cite their sources.
The design of a highly stabilized control system for a large electromagnet requires the knowledge of its small signal impedance as a function of frequency. The impedance of such an electromagnet was calculated, taking into account the effects of eddy currents but ignoring non-linearities in the magnetizing curve of the iron. It has been possible to use typical values for the relative incremental permeability and conductivity of iron to obtain a rather good estimate of its impedance over four decades above the lowest frequency for which reactive components of the impedance are significant. There is a change in slope in the curve of the magnitude of the impedance at a frequency corresponding to a skin depth equal to approximately three-quarters of the radius of cross section of the core. Above this frequency the magnitude of impedance rises at 3 dB per octave and the phase angle approaches 45°. At much higher frequencies the existence of stray capacities causes deviations from this predicted behaviour.
No takes yet. Share an insight, caveat, or question.
Kollar et al. (1961) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: