Answers are grounded in this paper and cite their sources.
A sensitive NO2- biosensor that is based on bacterial reduction of NO2- to N2O and subsequent detection of the N2O by a built-in electrochemical N2O sensor was developed. Four different denitrifying organisms lacking NO3- reductase activity were assessed for use in the biosensor. The relevant physiological aspects examined included denitrifying characteristics, growth rate, NO2- tolerance, and temperature and salinity effects on the growth rate. Two organisms were successfully used in the biosensor. The preferred organism was Stenotrophomonas nitritireducens, which is an organism with a denitrifying pathway deficient in both NO3- and N2O reductases. Alternatively Alcaligenes faecalis could be used when acetylene was added to inhibit its N2O reductase. The macroscale biosensors constructed exhibited a linear NO2- response at concentrations up to 1 to 2 mM. The detection limit was around 1 microM NO2-, and the 90% response time was 0.5 to 3 min. The sensor signal was specific for NO2-, and interference was observed only with NH2OH, NO, N2O, and H2S. The sensor signal was affected by changes in temperature and salinity, and calibration had to be performed in a system with a temperature and an ionic strength comparable to those of the medium analyzed. A broad range of water bodies could be analyzed with the biosensor, including freshwater systems, marine systems, and oxic-anoxic wastewaters. The NO2- biosensor was successfully used for long-term online monitoring in wastewater. Microscale versions of the NO2- biosensor were constructed and used to measure NO2- profiles in marine sediment.
No takes yet. Share an insight, caveat, or question.
Nielsen et al. (2004) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: