Answers are grounded in this paper and cite their sources.
Describes the results of a study into the effect of a dedicated calibration facility on the calibration relationships for hot-wire probes. Calibrations were carried out with plated and unplated normal hot-wire probes using both parallel and perpendicular support orientation in a calibration facility with variable nozzle exit area and in a wind tunnel. The results obtained clearly demonstrate that the cross sectional area of the calibration flow has a major effect on the evaluated calibration relationship. In particular the results for the parallel support orientation show a continuous variation in the interpreted velocity with cross sectional area. The difference between the 12 mm 2 and the 120 mm 2 nozzles was about 3-4% and a further difference of about 3-4% was observed for the wind tunnel comparison.
No takes yet. Share an insight, caveat, or question.
Khan et al. (1987) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: