This is the authors' abstract. We don't add key points for this paper.
This study proposes a rapid and simple method for synthesizing mullite hollow microspheres through an Al(OH) 3 –SiO 2 precursor route. The approach combines spray drying with high-temperature sintering to regulate the hollow spherical structure without a sacrificial-template removal step. The effects of solid content and sintering temperature on the morphology, shell-wall structure, mechanical strength, pore characteristics, and thermal-insulation performance of the microspheres were systematically investigated. The results show that appropriate solid content promotes slurry atomization and stable hollow-sphere formation, while sintering temperature controls mullite phase development, shell-wall densification, and pore-structure evolution. Under the balanced optimum condition, the microspheres exhibit uniform spherical morphology, suitable shell-wall thickness, and a well-developed pore structure, achieving a maximum cylindrical compressive strength of 16.16 MPa, a low thermal conductivity of 0.131 W/(m·K), and a bulk density of approximately 0.69 g/cm 3 . The lowest thermal conductivity among the tested samples is 0.124 W/(m·K) at 1500 °C, which is attributed to the increased porosity and extended heat-transfer path, although excessive shell-wall thinning slightly reduces the compressive strength. The property synergy is associated with Al(OH) 3 dehydration, Al–O–Si interfacial diffusion, mullite nucleation and growth, thermodynamically driven shell-wall densification, and the coupled regulation of hollow cavities and shell-wall pores during sintering. These findings provide experimental evidence and mechanistic guidance for designing lightweight mullite hollow microspheres for load-bearing thermal-insulation applications in high-temperature environments.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Lan et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: