Answers are grounded in this paper and cite their sources.
We have developed a high-current photodiode (PD) array module that consists of a beam splitter, which splits a light beam from a single-mode fiber into four beams with identical powers, a backside-illuminated InGaAs p-i-n PD array, and a two-stage Wilkinson RF power combiner. To obtain a linear PD response, the PD is equipped with a partially depleted absorber, which reduces the bias voltage. To prevent thermal failure, the backside-illuminated PD structure is used, which reduces the thermal resistivity. The beam splitter is fabricated using optical contacts at the SiO2interfaces between a coating film and a neighboring prism to prevent degradation of the adhesive glue at the prism interfaces along the optical path; therefore, light with a power of a watt level can be used. The two-stage Wilkinson combiner combines four RF outputs of the PD array into a single-RF output through a K connector; the combiner also works as an impedance-matching circuit. Experimental results reveal that an RF power output of 29.0 dBm can be obtained at a frequency of 5 GHz, and good intermodulation distortion characteristics with a third-order intercept point of 32.5 dBm can be achieved.
No takes yet. Share an insight, caveat, or question.
Itakura et al. (2010) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: