Answers are grounded in this paper and cite their sources.
In this work, we fabricated and characterized organic photovoltaic (OPV) devices with hybrid composite anodes containing single-walled carbon nanotube (SWCNT) networks sandwiched between ITO and PEDOT : PSS. The SWCNTs used were initially grown on silicon wafers by a surfactant-free process based on ACCVD (alcohol catalytic chemical vapor deposition), and then transferred to glass substrates with pre-patterned indium-tin-oxide (ITO) electrodes for the fabrication of our OPV devices. We also integrated H2SO4/HNO3-treated and N2H4-treated SWCNT networks into OPV devices to investigate the effect of chemically-treated SWCNTs on OPV devices' performance. We found that open-circuit voltage (Voc) of our OPV devices was insensitive to SWCNTs' work function shifting caused by the employed chemical treatments, while their short-circuit current (Jsc) and power conversion efficiency (PCE) both varied in the order of: reference devices < devices with pristine SWCNT networks < devices with H2SO4/HNO3-treated SWCNT networks < devices with N2H4-treated SWCNT networks. In particular, we found that integration of N2H4-treated SWCNTs into the hybrid composite anode could enhance Jsc by 12% to 20% in P3HT : PCBM OPV devices (with PCE up to 4.02%). The improved performance in devices integrated with N2H4-treated SWCNTs can be attributed to (i) better crystallinity of the P3HT polymer, and (ii) increased hole-transport efficiency of the hybrid composite anode, both induced by the penetration/digitation of SWCNTs into the P3HT polymer layer.
No takes yet. Share an insight, caveat, or question.
Su et al. (2010) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: