Answers are grounded in this paper and cite their sources.
We have deposited silicon/nitrogen-incorporated diamond-like carbon (Si–N-DLC) films by radio-frequency plasma-enhanced chemical vapor deposition (PECVD) using methane (CH 4 ), argon (Ar), and hexamethyldisilazane [(CH 3 ) 3 Si] 2 NH as the Si and N source, and investigated the structure and the mechanical and tribological properties of the films. We compared the properties of the Si–N-DLC films with those of the Si-incorporated DLC (Si-DLC) films prepared by PECVD using monomethylsilane (CH 3 SiH 3 ) as the Si source. It was found that the N incorporation together with Si into DLC was effective in further decreasing the internal stress and increasing the adhesion strength. The friction coefficients of the Si–N-DLC films containing 4.0% N or less were as low as those of the Si-DLC films. We also found that the Si–N-DLC film containing 10.0% Si and 4.0% N had a higher wear resistance than the Si-DLC film containing 10.8% Si. The wear rate was comparable to that of the undoped DLC film.
No takes yet. Share an insight, caveat, or question.
Nakazawa et al. (2012) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: