Answers are grounded in this paper and cite their sources.
This paper presents the challenges encountered and the solutions adopted during the construction of a versatile voltage-fed high-frequency series-resonant half-bridge inverter module. It is used in the large-signal power generator of an inductive load characterization test-bench operating from 1 kHz up to 1.5 MHz and up to 7-kW output power for a variety of loads. Square wave operation of the module is established slightly above resonance under zero voltage switching conditions. Output power is controlled by means of a variable dc bus while resonant conditions are fixed by means of two adjustable capacitor banks. The control of every test-bench block and the triggering waveform generation is performed digitally with a field programmable gate array. Two prototype modules have been designed, constructed and evaluated for operation in half-bridge and full-bridge configurations showing rugged and stable operation under hazardous conditions such as voltage transients as high as dv/dt = 50 kV/mus at 1 MHz during the characterization of domestic induction heating loads.
No takes yet. Share an insight, caveat, or question.
Puyal et al. (2008) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: