Answers are grounded in this paper and cite their sources.
This biomechanical study compares the initial fixation strength of a novel bioabsorbable two-shell expansion bolt (EB) with that of a well-established interference-screw technique in bone-patellar tendon-bone (BPTB) reconstruction in a calf model. Thirty tibia plateaus (age 5-6 months) were assigned to three groups: In groups I and II, trapezoidal bone plugs of BPTB grafts were fixed with bioabsorbable poly-L-lactide interference screws (8 x 23 mm) or titanium interference screws (8 x 25 mm) respectively. In group III, semicircular grafts were fixed using bioabsorbable poly-D, L-lactide expansion bolts (5.8/8.7 x 10 x 35 mm). The tensile axis was parallel to the bone tunnel, and the construction was loaded until failure applying a displacement rate of 1 mm per second. In group II the mean ultimate loads to failure (713 N+/-218 N) were found to be significantly higher than those of groups I (487 N+/-205 N) and III (510 N+/-133 N). Measurement of stiffness showed 45 N/mm+/-13.3 in group I, 58 N/mm+/-17.4 in group II and 46 N/mm+/-6.9 in group III, and did not demonstrate significant differences. We found a correlation between insertion torque and wedge insertion force and ultimate loads to failure in all groups (r=0.53 in group I, r =0.54 in group II, and r =0.57 in group III). Cross-section planes of bone tunnel increased by 51%, 30% and 31% respectively, following insertion of screws or expansion of bolts (p<0.05). We conclude that ACL graft fixation by means of the presented expansion bolt demonstrates a fixation strength similar to the established bioabsorbable screw fixation, and is a reasonable alternative fixation method, especially since some of the specific pitfalls of screw fixation can be avoided.
No takes yet. Share an insight, caveat, or question.
Piltz et al. (2004) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: