Answers are grounded in this paper and cite their sources.
STUDY DESIGN: In vitro biomechanical testing of transvertebral body screws in different positions in both axial pull-out and toggle. OBJECTIVES: To determine the relative strength of unicortical versus bicortical screw fixation within the vertebral body and to determine comparative strength of juxta-endplate and central screw positions with and without staples in both axial pull-out and toggle modes. SUMMARY OF BACKGROUND DATA: Loss of fixation is common in centrally placed screws at the rostral end of a construct. To preserve segmental vessels, juxta-endplate screw positions are often used. The biomechanical strength of such screw placement methods has not been measured. METHODS: Eighty-three human cadaveric vertebral bodies were tested for axial pull-out and toggle with and without staples. Screw positions included central, juxta superior, and inferior endplate. Juxta-endplate screws were toggled in both the rostral and caudal directions perpendicular to the screw axes. RESULTS: Unicortical fixation resulted in a 93% decrease in axial pull-out strength compared with bicortical fixation. Centrally placed screws and juxta-endplate screws were equivalent in axial pull-out if no staples were used. The juxta-endplate screw with a staple that was toggled away from the endplate had the highest yield strength, followed by the central screw with a staple, and then the juxta-endplate screw without a staple toggled away from the endplate. CONCLUSIONS: Bicortical fixation is much stronger than unicortical fixation. Centrally placed screws are significantly stronger when used with a staple. When preservation of segmental vessels is desirable, juxta-endplate screws should be placed in such a manner that compressive forces are directed away from the endplate.
No takes yet. Share an insight, caveat, or question.
Lowe et al. (2002) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: