Answers are grounded in this paper and cite their sources.
(K,Na)NbO 3 –LiNbO 3 –CuO lead-free piezoelectric ceramics that show a high mechanical quality factor Q m were synthesized and used as a drive element of an ultrasonic motor. The Q m of the (K,Na)NbO 3 ceramic could be enhanced by chemical modification using Li and Cu as well as microstructure control to obtain ceramics with fine grains. The grain size dependence of the Q m was consistent with a model based on the formation of internal bias field to stabilize the domain structure. A shear mode was used to drive the ultrasonic motor because the piezoelectric d 31 and d 33 constants of the ceramics were not sufficient for the motor applications. A shear-mode motor driven with four piezoelectric ceramic plates was developed using the lead-free ceramics with a high Q m of 1400, a high d 15 of 207 pC/N, and a high k 15 of 0.72. The highest revolution speed of 486 rpm was achieved at 34.5 kHz with the input voltage of approximately 180 V p–p (peak to peak).
No takes yet. Share an insight, caveat, or question.
Li et al. (2008) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: