Answers are grounded in this paper and cite their sources.
Due to the intrinsic poor ionic/electronic conductivities of Li 2 S, it is a great challenge to realize high-rate all-solid-state lithium–sulfur batteries (ASSLSBs) with long cyclic performance. Herein, ultrasmall Li 2 S (∼15 nm) is evenly deposited on a carbon nanotube (CNT) via a facile liquid-phase method to address these issues. The unique structure of the Li 2 S deposited on a CNT composite cathode can improve ionic/electronic conductivities of Li 2 S effectively and relieve the generated internal stress/strain during cycling. Specifically, the resultant Li/75%Li 2 S-24%P 2 S 5 -1%P 2 O 5 /Li 10 GeP 2 S 12 /Li 2 S-53%CNT ASSLSBs show a reversible capacity of 651.4 mAh g –1 under 1.0C at 60 °C after 300 cycles and even at a much higher cathode load of 5.08 mg cm –2, a high discharge capacity of 556 mAh g –1 can still be obtained under 0.1C after 20 cycles. The outstanding electrochemical performances are also attributed to the high diffusion coefficient of Li 2 S-53%CNT, which is 39 times that of pristine Li 2 S. This work presents an efficient procedure to design cathode materials with high ionic/electronic conductivities and paves the way for the successful commercialization of high-rate ASSLSBs.
No takes yet. Share an insight, caveat, or question.
Jiang et al. (2021) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: