Answers are grounded in this paper and cite their sources.
The material removal of SiC utilizing a 2.45 GHz microwave‐driven plasma jet source in comparison with a 13.56 MHz RF excited plasma jet source at atmospheric pressure has been investigated. A coaxial nozzle with a central tube for helium, CF4 and O2 feeding the plasma and the outer ring‐shaped nozzle for N2 to shield the plasma jet from the surrounding air is applied. Additionally an O2 gas flow is provided and its effect on the etching rate is discussed for varied [CF4]/[O2] ratios. By optimizing the ratio of CF4 and O2 gas flow an improvement in etching rates and a change in surface roughness have been found. An increase of the etching rate with a decrease of the CF4 ratio has been detected for both jets. The etching rate of the microwave excited jet has been improved additionally by heating the SiC sample up to 350 °C.
No takes yet. Share an insight, caveat, or question.
Eichentopf et al. (2009) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: