Answers are grounded in this paper and cite their sources.
Experimental study demonstrates selective copper recovery above 80% with under 5% iron dissolution from chalcopyrite, suggesting an efficient low-temperature leaching alternative.
The hydrometallurgical recovery of copper from chalcopyrite (CuFeS 2 ) remains challenging due to its high chemical stability and the formation of passivating species during leaching. To increase copper extraction, pretreatment stages are often required, thereby increasing energy consumption and reagent demand. In this work, a system for the selective recovery of copper at pH 3 and room temperature was evaluated using phosphate (PO 4 3− ) in the presence of EDTA (6 × 10 −3 M) and hydrogen peroxide as the oxidizing agent. The objective was to promote selective copper dissolution while limiting iron dissolution. The results showed copper recoveries above 80% under the most favorable experimental conditions. Iron extraction remained below 5%, while copper remained predominantly in solution as sulfate and phosphate complexes. The results suggest that the system promotes chalcopyrite oxidation and selective copper dissolution, while iron tends to form low-solubility species in the presence of phosphate. These findings indicate that the phosphate–EDTA–H 2 O 2 system represents a promising alternative for selective copper leaching at pH 3 and room temperature.
No takes yet. Share an insight, caveat, or question.
Calla-Choque et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: