Answers are grounded in this paper and cite their sources.
Multiscale modeling reveals optimal cavity spacing and wettability for bubble detachment on hydrogen-evolving electrodes, highlighting guidelines to reduce electrochemical losses.
Electrochemical water splitting is strongly influenced by hydrogen bubble dynamics, as bubbles block active sites and contribute to additional overpotential losses on electrodes. Here, we present a multiscale numerical framework that sequentially connects nanoscale bubble nucleation with microscale growth, interaction, and coalescence-induced detachment. The results reveal a trade-off between increasing nucleation-site density and minimizing diffusion-field overlap between neighboring bubbles. Favorable cavity geometries reduce the nucleation overpotential by approximately 15–40% relative to the smallest normalized cavity sizes considered. Increasing the active nucleation-site density from 2 to 8% introduces only 2% additional current loss, whereas increasing the density to 30% raises the current loss to about 40%, indicating that excessive cavity densities become electrochemically unfavorable. These findings identify inter-cavity spacing as a key design parameter governing the balance between nucleation enhancement and transport losses. At the microscale, simulations show that bubble coalescence can induce detachment below the buoyancy-controlled limit. We introduce a design map that shows the wettability threshold for bubble removal can vary from super-aerophobic surfaces with a contact angle of 5° to aerophobic surfaces with a contact angle of 30°. The proposed framework provides physics-based design guidelines for hydrogen-evolving electrodes that simultaneously promote bubble generation and accelerate bubble removal.
No takes yet. Share an insight, caveat, or question.
Azad et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: