Answers are grounded in this paper and cite their sources.
Experimental study demonstrates improved photovoltaic efficiency in dye-sensitized solar cells using tungsten trioxide nanocomposites, indicating their potential as high-performance photoanodes.
The TiO 2 @WO 3 nanocomposites with varying WO 3 content (5, 10, and 15 wt%) were synthesized by physical mixing method and evaluated as photoanodes for dye-sensitized solar cells (DSSCs). The incorporation of WO 3 significantly influences crystallite size, lattice strain, and defect density, with the 10 wt% sample (TW10) showing optimized structural properties with improved crystallinity and reduced defects. A noticeable bandgap narrowing in TW10 enhances light absorption capability. The formation of a hierarchical structure, where TiO 2 QDs are uniformly anchored onto WO 3 nanorods, leads to an increased surface area. BET analysis confirms an increase from 171 m 2 /g (TiO 2 ) to 203.61 m 2 /g (TW10), supporting enhanced dye adsorption and electrolyte diffusion. Consequently, TW10 exhibits superior photovoltaic performance with an open-circuit voltage of 0.88 V, short-circuit current density of 14.29 mA/cm 2 , and an efficiency of 3.77%. The improved performance is attributed to hetrojunction formation, high surface area, efficient charge transport, enhanced interfacial interaction, and reduced recombination losses, demonstrating the potential of TW10 as an efficient DSSC photoanode.
No takes yet. Share an insight, caveat, or question.
Momin et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: