Answers are grounded in this paper and cite their sources.
Hydrated lime-sugarcane bagasse composites are promising low-density materials, but the effects of bagasse aggregate grading and surface modification on their compressive response remain insufficiently resolved. This study provides novel insights into the characterisation of hydrated lime-bagasse composites by establishing relationships between aggregate morphology, treatment-induced physicochemical changes, and their quantitative compressive response. Three particle size fractions (passing 1.18, 2.36 and 4.75 mm sieves) were compared with as-received bagasse, while limewater and sodium-silicate treatments were investigated as alternative aggregate surface modifications. The mixtures were prepared at a constant bagasse content (106.8 kg/m 3 ) achieving a dry density of 418-440 kg/m 3 . Compressive behaviour of 100 mm cubes was evaluated at 28 and 90 days according to BS EN 826, together with initial modulus and energy absorption up to 10% strain. In addition, microstructural characterisation and phase/chemical characterisations were conducted using SEM-EDS, XRD and FTIR. The as-received bagasse achieved the highest 90-day compressive strength (0.326 MPa), whereas the smallest particle-size fraction, passing 1.18 mm, achieved a comparable strength of 0.322 MPa while other fractions primarily improved the initial stiffness at lower strengths. Alkaline modification via lime pretreatment enhanced the compressive strength by up to 46.4% (attaining 0.477 MPa). This improvement was associated with treatment-induced mass loss, increased water absorption, surface roughening, calcium enrichment and carbonate deposition. Conversely, sodium silicate treatment reduced the compressive strength to 0.207 MPa despite producing a mineralised aggregate surface. This response was associated with treatment-induced changes in aggregate mass, density and effective volume. These findings demonstrate that targeted materials and processing modifications can significantly improve the mechanical performance of low-density lime-bagasse composites, supporting their further development for non-structural applications while promoting the valorisation of agricultural waste and low-carbon construction.
No takes yet. Share an insight, caveat, or question.
Arachchi et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: