Answers are grounded in this paper and cite their sources.
The low-frequency noise sources are investigated in as-prepared and aged GaN light-emitting diodes (LEDs). Accelerated aging is performed by thermal (300h at 240°C) and electrical forward-bias stressing (20 and 50mA for 2500h). At low currents I<IRTS, where IRTS is a critical current, the low-frequency noise is dominated by random telegraph signal (RTS) noise on top of the 1∕f noise. An explanation is given for the giant relative current jumps ΔI∕I≈50% and an expression for IRTS is derived. The RTS noise in our devices is a less-sensitive diagnostic tool for studying the results of accelerated aging. Two components of the 1∕f noise were observed: one is related to the quantum-well junction and the other is due to series resistance noise. The two 1∕f spectra have different current dependences. It was found that the junction 1∕f noise is not significantly affected by aging. However, a strong increase in series resistance noise, by a factor of 60–800 compared to unstressed devices, is observed after strong electrical and thermal aging. This high increase goes hand in hand with a relatively small increase in the value of the series resistance (13%–90%). This makes 1∕f noise a very sensitive reliability indicator for GaN LEDs after accelerated aging. We discuss the physical origin of LED degradation.
No takes yet. Share an insight, caveat, or question.
Bychikhin et al. (2005) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: