Answers are grounded in this paper and cite their sources.
The tip clearance is an essential structure in multiphase pumps, and the vortex flow caused by the leakage at the tip of the blade disturbs the internal flow field of the pump, leading to energy losses, which in turn weaken the pump’s pressure‐boosting performance and reduce its work output efficiency. To clarify the energy loss behavior at various tip clearances, the study examines the effects of tip clearance and IGVF on energy dissipation using entropy production theory. The energy losses under the coupled operating conditions of gas‐liquid two‐phase flow and tip clearance are further revealed. Increasing tip clearance leads to greater impeller energy dissipation. The IGVF modifies the dissipation distribution on the impeller for different clearances. Entropy production on the impeller wall is primarily focused on the blade pressure side, at the inlet leading edge, within the tip clearance, and near the hub close to the inlet. In addition, a larger tip clearance tends to decrease the friction loss associated with the impeller blades. For different IGVFs, the turbulent dissipation inside the impeller shows relatively weak dependence on tip clearance. Tip clearance loss and turbulent dissipation loss exhibit different magnitudes of variation and dominance under different IGVFs. The maximum turbulent dissipation rate reached 4640 m 2 /s 3 , the maximum entropy production in the impeller reached 2.02 × 10 4 W/(m 3 ·K) at IGVF = 15% and Rtc = 0.5 mm, and the tip clearance loss at IGVF = 5% and Rtc = 1.5 mm was nearly 50% higher than that under the other conditions.
No takes yet. Share an insight, caveat, or question.
A 2026 study studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: