Answers are grounded in this paper and cite their sources.
Investigations on ion transport behaviour of new Ag + ion conducting quaternary solid electrolyte systems: x [0.75AgI : 0.25AgCl] : (1 − x )RbI, where 0.1 ≤ x ≤ 1 mol.wt fractions, are reported. The solid electrolyte systems were synthesized adopting different routes of solid solution reactions. An alternative host salt, 'a quenched [0.75AgI : 0.25AgCl] mixed system solid solution', discovered at the present laboratory, has been used in place of AgI. The compositional dependent conductivity studies at room temperature revealed the quaternary systems 0.7[0.75AgI : 0.25AgCl] : 0.3RbI as the optimum conducting composition (OCC). AgI has been traditionally and most widely used as host salt in the past to prepare the majority of well-known fast Ag + ion conductors including the ternary superionic solids M Ag 4 I 5 ( M = Rb, K, NH 4 ). Also, RbAg 4 I 5 has been recognized as one of the highest conducting superionic solids with conductivity σ rt ∼ 10 −1 S cm −1 at room temperature. However, it has been observed that RbAg 4 I 5 is thermodynamically unstable, particularly in the open ambient conditions, while the newly synthesized quaternary solid electrolyte, having OCC 0.7[0.75AgI : 0.25AgCl] : 0.3RbI, has been observed to be much more stable than RbAg 4 I 5 . For direct comparison of the ion conduction behaviour of the newly synthesized OCC, the ternary superionic solid RbAg 4 I 5 (0.8AgI : 0.2RbI) has also been synthesized in an identical manner. The room temperature conductivity (σ rt ) of the newly synthesized quaternary OCC was slightly lower than that of RbAg 4 I 5 . However, σ rt remained practically stable for a fairly long time in the open ambient conditions as compared with that of RbAg 4 I 5 . The mechanism of ion transport in OCC has been characterized on the basis of experimental studies on various ionic parameters namely conductivity (σ), ionic mobility (μ), mobile ion concentration ( n ), ionic drift velocity ( v d ), ionic transference number ( t ion ) etc. The temperature dependent studies on these ionic parameters provided information regarding various energies involved in the respective thermally activated processes. Solid state batteries have been fabricated using OCC as electrolyte in the cell configuration Ag-metal (anode)/0.7[0.75AgI : 0.25AgCl] : 0.3RbI (solid electrolyte)/C+I 2 (cathode) and the cell potential discharge characteristics have been studied under various load conditions.
No takes yet. Share an insight, caveat, or question.
Agrawal et al. (2007) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: