Answers are grounded in this paper and cite their sources.
The powder bed density (PBD) is an important first order input property in Laser Powder Bed Fusion. The standardized tests however subject the metal feedstock to a different deposition mechanism than that utilized in most commercial additive systems (gravitational versus forced layer-wise). This highlights the need for a reliable and robust method to determine the in situ PBD. A novel evaluation method based on the fabrication of hollow specimens with variable cavity volume fractions was therefore developed. A test build fabricated with stainless steel - 304 L powder – built with a hard blade recoater, showed an undisturbed in situ PBD of 4.796 g/cm 3 , an increase of 6.6% compared to the apparent density. The in situ PBD of the individual specimens decreased with their shell fraction, quantifiable by a powder density model. An in situ PBD decrease by up to 3.4% or 0.155 g/cm 3 was measured. This decrease was found to be more pronounced in the travel axis of the recoater. The looser packing of the powder was mainly attributed to the process specific formation of agglomerations created by spatter. This conclusion was supported qualitatively by a random close packing simulation of the used powder size distribution, which revealed a decrease in the packing factor with increasing agglomerate volume. The results of the novel evaluation have been promising, subject to more rigorous testing of the method's limits.
No takes yet. Share an insight, caveat, or question.
Wenda et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: