Answers are grounded in this paper and cite their sources.
Bacterial cellulose (BC) aerogel was obtained by treating BC hydrogel in super critical fluid of ethanol at 6.38 MPa and 243°C. The apparent density of the BC aerogel was 6 mg/cm3 and the porosity was more than 99 vol%. Scanning electron microscopy results showed that micro fibrils with 20-60 nm developed into a highly branched three-dimensional network structure. Compression stress-strain measurement indicated that the stresses of BC hydrogel were 20 kPa at 60% strain and 65 kPa at 80%, while the stresses of BC aerogel were 54 kPa at 60% strain and 140 kPa at 80%. If the BC aerogel was immersed in organic solvents, various kinds of organogels were obtained.
No takes yet. Share an insight, caveat, or question.
Maeda et al. (2006) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: