Answers are grounded in this paper and cite their sources.
This study investigates the application of Box–Behnken response surface methodology (RSM) to optimise the multi-metal adsorption behaviour of Co²⁺, Cu²⁺, Ni²⁺, Zn²⁺, and Mg²⁺ ions using hydroxycancrinite zeolite produced from an alkaline effluent generated during the hydrometallurgical upgrading of iron ore. The original effluent, containing approximately 2.5 g L⁻¹ Al₂O₃ and 7.0 g L⁻¹ SiO₂, was concentrated by evaporation prior to hydrothermal crystallisation, producing approximately 8 g of hydroxycancrinite per litre of original effluent without the addition of external aluminium or silica sources. The effects of contact time, solution pH, and adsorbent dosage on the simultaneous adsorption of the five metal ions were systematically evaluated using a Box–Behnken experimental design. Analysis of variance (ANOVA) identified pH and adsorbent dosage as the most influential variables governing adsorption performance, while significant quadratic and interaction effects were observed for most responses. The developed second-order models exhibited excellent predictive capability, with coefficients of determination (R²) exceeding 0.98 and good agreement between experimental and predicted values. Under the optimised conditions, removal efficiencies exceeded 98% for Cu²⁺, Co²⁺, Ni²⁺, and Mg²⁺, while Zn²⁺ removal exceeded 83%. FESEM–EDS analysis revealed smoother particle surfaces and pore infilling after adsorption, confirming effective metal uptake by the hydroxycancrinite framework. These findings demonstrate the feasibility of converting aluminosilicate-rich alkaline effluent into a functional adsorbent for multi-metal adsorption, providing a proof-of-concept for waste valorisation and sustainable resource recovery in the hydrometallurgical processing of low-grade iron ores.
No takes yet. Share an insight, caveat, or question.
Tripathy et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: