Answers are grounded in this paper and cite their sources.
Over-humidification and condensation in polymer electrolyte fuel cells (PEFCs) can promote local flooding and performance losses, creating a need for simple and localized liquid water detection. In this study, copper interdigitated electrode (IDE) sensors on polyimide substrates are modified with electrochemically deposited polyaniline (PANI) and poly(3,4-ethylenedioxythiophene) (PEDOT) coatings. The sensors are characterized using FTIR, contact angle measurements, optical microscopy, SEM/EDX, XPS, and defined droplet tests. PANI produces a comparatively compact and hydrophobic surface, whereas PEDOT forms a finer, more hydrophilic structure that promotes droplet spreading and water retention. All sensor types show rapid voltage responses to liquid water bridging, with bare copper providing the highest absolute sensitivity. Wet-dry transitions and an 24 h ex-situ PEFC-relevant humid gas protocol, comprising replicated cathode and anode side conditions, reveals distinct response characteristics. Bare copper exhibits a delayed, threshold-like voltage decrease and comparatively unstable baseline behaviour. PEDOT responds strongly to humidification but shows persistent low voltage states and slower recovery, consistent with greater water retention. PANI provides the most balanced performance, combining rapid response, controlled wetting, gradual and reversible signal evolution, and the most stable voltage behaviour within the investigated exposure window. Post-test XPS confirms the presence of oxidized copper species and coating-specific elemental signals, while also indicating that the polymer layers remain detectable after exposure. These results identify PANI as the more promising coating for adapting copper IDE sensors to localized condensation and over-humidification detection under the studied PEFC-relevant conditions.
No takes yet. Share an insight, caveat, or question.
Käfer et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: