Answers are grounded in this paper and cite their sources.
High deformation gradients in mining environments can restrict the applicability of satellite interferometric synthetic aperture radar (InSAR) by inducing phase aliasing. To address this limitation, this study applies structure from motion (SfM) to multi-temporal unmanned aerial vehicle imagery and digital image correlation (DIC) to the resulting SfM-derived products for 3D slope monitoring at a slow-moving instability affecting a reclaimed coal mine in northwest Spain over a two-year period. The performance of this approach was compared with InSAR through cross-validation. Ascending and descending InSAR data and SfM-DIC-derived east–west (EW), north–south (NS), up–down (UD), and 3D displacements were analyzed together and validated against differential GNSS (DGNSS) measurements. Ascending InSAR achieved an RMSE of 5.7 cm, whereas the descending RMSE increased to 43.8 cm, most likely because of phase aliasing. SfM-DIC yielded a 3D RMSE of 32.8 cm and retrieved a maximum 3D displacement of 306.7 cm at the DGNSS validation points, close to the 323.1 cm measured by DGNSS. Projecting the SfM-DIC results onto the line of sight revealed descending velocity gradients of up to −90 cm/yr between points spaced ~20 m apart, exceeding the theoretical Sentinel-1 phase-aliasing threshold of ±85 cm/yr. For data fusion, combining ascending, EW, and NS measurements best balanced accuracy and large-displacement retrieval capability, with a 3D RMSE of 30.0 cm and a maximum 3D displacement of 315.9 cm at the validation points. These results demonstrate that SfM-DIC is an effective complement to InSAR for monitoring ground deformation in areas prone to phase aliasing.
No takes yet. Share an insight, caveat, or question.
López‐Vinielles et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: