Answers are grounded in this paper and cite their sources.
In this resistivity measurement, a pair of semicircular measuring electrodes is connected to a series or parallel resonance circuit composed of an inductance L and a variable capacitance C. A sample is coupled capacitively with the electrode with no direct contact. The authors' method is similar to the Q meter method in principle, but uses a comparative measurement. Some analyses of this method and the experimental results are reported: (1) the measurable range of resistivity is limited by an electrode structure and a frequency, (2) the resistivity measurement over a range as wide as 0.3 to 1500 Ω-cm can be carried out by using both the series and the parallel resonance circuits, (3) for a thin sample below 3 mm in thickness, the resistivity can be measured by using a calibration, (4) the influence of different surface treatments is not seen if the surface remains flat.
No takes yet. Share an insight, caveat, or question.
Miyamoto et al. (1967) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: