This is the authors' abstract. We don't add key points for this paper.
Waveguide-fed slot arrays in standing wave mode have been employed successfully in space based remote sensing radars because of their high efficiency, ease of deployment and their ability to withstand the radiation environment. Although the bandwidth requirement in such systems is minimal, at Ka band and above manufacturing tolerances in the order of 1 mil (25 μm), achieved in the dip brazing process, may affect their performance. To produce designs that are less sensitive to manufacturing tolerance, genetic algorithm (GA) optimization is employed in conjunction with a full wave analysis utilizing the method-of-moments solution to the pertinent integral equations of slot apertures of a planar array. In this work, a single 8 × 10 sub-array of an interferometric antenna, proposed previously for a planetary mapping application, was investigated. The array was first designed by the Elliott's procedure and subsequently the design parameters were perturbed by GA optimization using the moment method analysis. The fitness parameter is a weighted function of return loss and gain over a number of frequencies in the operating band. A matching waveguide section consisting of inductive irises is also optimized using GA and mode matching technique. Optimum designs producing nearly constant gain and good return loss over 6% bandwidth are found to be less sensitive to manufacturing tolerance than the initial Elliott design.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
S.R. Rengarajan (2013) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: