For a maximum fiber-coupled power, high power broad-area diode lasers must operate with a small lateral far-field divergence at high continuous wave (CW) powers. However, these structures are laterally multi-moded, with a low beam quality and wide emission angles. We present a new approach to suppress higher-order lateral modes based on an anti-guiding layer with a high refractive index inserted at the edges of the active stripe. Simulations of planar waveguides containing germanium layers reveal that strong mode-coupling effects occur. These are found to vary as a function of the thickness of the inserted layer. By embedding the germanium layer in the outer region of a ridge-waveguide, the mode coupling effects result in a reduction of the modal gain of higher-order lateral modes. The lateral far-field divergence of fabricated 90- μm stripe lasers emitting at 980 nm and containing such an anti-guiding layer is narrowed by 3°at a CW output power of 10 W.
No takes yet. Share an insight, caveat, or question.
Wenzel et al. (2013) studied this question.
Synapse has enriched 5 closely related papers on similar clinical questions. Consider them for comparative context: