Answers are grounded in this paper and cite their sources.
Dilatometric and calorimetric studies have been made of the fusion process of linear polyethylene crystallized by stirring xylene solutions at elevated temperatures. It is shown that the melting point of the crystals increases rapidly from 139.5°C to 145°C in the crystallization temperature range of 100–103°C and levels off to 146 ± 0.5°C, provided that very slow heating rates are employed. Stirrer‐crystallized samples treated with fuming nitric acid show higher crystalline contents. Comparison of their enthalpies of fusion and melting points indicate that higher molecular order along the fiber axis is associated with higher crystallization temperatures. This is in general agreement with corresponding results of other modes of crystallization. The attack of fuming nitric acid on stirrer crystals is characterized by weight‐loss curves similar to those of dilutesolution crystals and bulk polyethylene. The linear molecular weight dependence on time of exposure to nitric acid suggests that the oxidation proceeds mainly from the chain ends at a constant rate for samples stirred in the lower crystallization range, but an increased rate is observed for a sample stirred from xylene at 105°C. It is suggested that the lamellar overgrowths, most evident at low crystallization temperatures, are epitaxially attached to the fiber axis, whereas the smaller crossbandings observed at higher crystallization temperatures are possibly made up of elements of chains that are only partly incorporated in the highly ordered fibrous core.
No takes yet. Share an insight, caveat, or question.
Rijke et al. (1971) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: