Answers are grounded in this paper and cite their sources.
Hydraulic fracturing plays an essential role in producing unconventional hydrocarbon resources. The success of hydraulic fracturing operations and the performance of developing unconventional hydrocarbon resources strongly depend on the distribution of proppants in the induced fractures. However, due to the gravitational force, proppants tend to settle down rapidly in the induced vertical fractures. This behaviour leads to the closure of the unpropped fracture at the higher sections after the hydraulic fracturing operation and a lower filling efficiency. Many studies on proppants have been made to improve the proppant filling efficiency. However, they are limited to the methods mainly focused on reducing proppants' density or increasing the buoyancy force of fracturing fluid. We desire to examine if gas bubbles can be generated inside fractures to improve proppant placement efficiency. Here, the self-generated gas floating technique is proposed for the first time. In this study, we conduct a series of experiments to demonstrate the feasibility of the self-generated gas floating technique. Firstly, the affinity between air/CO 2 bubbles and proppants is investigated by measuring the contact angles of water/CO 2 bubbles on different types of proppants. Secondly, we conduct experiments under ambient conditions to visualize proppant distribution after implementing self-generated CO 2 bubbles inside the fracture model. Lastly, we conduct the high-pressure experiment to verify whether the self-generated gas floating technique can lift proppants under high-pressure conditions. Experimental results indicate that resin-coated 30/50 mesh-sized proppants have demonstrated a strong adhesion force to CO 2 bubbles. The self-generated CO 2 bubbles add an external lifting force to the proppants, bring the proppants to a higher fracture location, and increase the proppant filling efficiency. Another significant observation of the self-generated gas floating technique under high-pressure conditions is that a steep pressure decline during the completion stage can lead to a spontaneous generation of CO 2 bubbles inside the fracture. • Self-generated gas floating technique is proposed to increase proppant placement efficiency. • The proposed technique works better for resin-coated proppants than ceramic proppants. • A larger pressure decline rate is more beneficial for applying the self-generated gas floating technique.
No takes yet. Share an insight, caveat, or question.
Li et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: