Answers are grounded in this paper and cite their sources.
Acid mine drainage (AMD), also referred to as acid rock drainage (ARD), is a byproduct from mining and its related activities that could persist beyond the closure of operation. Although alkaline-generating materials are used for treatment via chemical neutralization, persistent metals such as manganese (Mn), nickel (Ni), and zinc (Zn) remain difficult to remove under circumneutral conditions. Adsorption offers a rapid and compact treatment method but adsorbents tend to wash away. This study explored the upcycling of spent slag (steel slag and blast furnace slag) as a template material for crosslinked chitosan, forming spent slag chitosan-coated composites (SCCs) to allow the adsorption of persistent metals at circumneutral pH in a two-step passive treatment system. Batch adsorption tests showed that the chitosan coating significantly increased metal removal while adsorption isotherms and kinetics were dependent on adsorbent-adsorbate pairs. Surface area-normalized adsorption capacities of SCCs surpassed other adsorbents, indicating their efficacy under circumneutral pH. Steel slag chitosan-coated composites (SS-CC) had higher adsorption capacities (46.4 mg Mn/m 2 , 56.2 mg Ni/m 2 , and 37.3 mg Zn/m 2 ) compared to blast furnace slag chitosan-coated composites (BFS-CC) (21.7 mg Mn/m 2 , 23.1 mg Ni/m 2 , and 26.4 mg Zn/m 2 ). However, BFS-CC displayed faster adsorption kinetics and higher selectivity for Ni, highlighting its potential for passive Ni recovery. The respective selectivities (Zn > Ni > Mn for SS-CC; Ni > Zn > Mn for BFS-CC) further support material-specific targeting of residual metals. These findings present a practical route for integrating slag waste valorization with sustainable AMD remediation through low-cost, passive adsorption systems.
No takes yet. Share an insight, caveat, or question.
Turingan et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: