Answers are grounded in this paper and cite their sources.
This work presents a mixed multilayered cavity-backed slot array antenna for the 27 GHz band, fed by a substrate-integrated groove gap waveguide (SIGGW). The proposed antenna structure is based on a three-layer design, consisting of two dielectric substrates for the feeding network and cavity distribution layer, and a metal layer for a corrugated slot array antenna. In the presented multilevel antenna design, the feeding network and cavity layer are implemented by periodic “Mushroom”-type surfaces, creating electromagnetic band gap properties. This allows for easy assembly of the distinct printed layers without requiring an electrical contact or a bonding layer. Simultaneously, we address the potential issue of energy leakage due to surface roughness or non-flat surfaces. Measurements show good agreement with the simulation results. An impedance bandwidth of 11.7%, ranging from 25.6 to 28.8 GHz, is achieved. The measured normalized radiation patterns are symmetrical, with sidelobe levels below -10 dB at both φ = 0° and φ = 90° planes. Finally, the maximum peak gain is measured at 17.72 dBi, along with a radiation efficiency of 84% and an aperture efficiency of 77% at the central operating frequency.
No takes yet. Share an insight, caveat, or question.
Petroutsos et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: